Reg. 24.1.2 Bottom damage assumptions
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Conventions - MARPOL - International Convention for the Prevention of Pollution from Ships - Unified Interpretations of Annex I - 48 Tank size limitation and damage stability - Reg. 24.1.2Bottom damage assumptions

Reg. 24.1.2 Bottom damage assumptions

 When applying the figures for bottom damage within the forward part of the ship as specified in regulation 24.1.2 for the purpose of calculating both oil outflow and damage stability, 0.3L from the forward perpendicular should be the aftermost point of the extent of damage.

Parent topic: 48 Tank size limitation and damage stability
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.