4.4 Package marking
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - 2011 TDC Code – Code of Safe Practice for Ships Carrying Timber Deck Cargoes, 2011 – Resolution A.1048(27) - Part A – Operational Requirements - Chapter 4 – Physical Properties of Timber Cargoes - 4.4 Package marking

4.4 Package marking

 All sawn wooden packages should be clearly marked with the volume of the package. The marking should be clearly visible on the top of the package as well as both long sides. The approximate weight should also be shown(29).

Parent topic: Chapter 4 – Physical Properties of Timber Cargoes
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.