16.6 Change of Operating Surface and Mode
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - DSC Code - Code of Safety for Dynamically Supported Craft – Resolution A.373(X) - Chapter 16 - Handling, Controllability and Performance - 16.6 Change of Operating Surface and Mode

16.6 Change of Operating Surface and Mode

 There should be no unsafe change in the stability, controllability or attitude of the craft during transition from one type of operating surface or mode to another. Information on change in the behaviour characteristics of the craft during transition should be available to the master.

Parent topic: Chapter 16 - Handling, Controllability and Performance
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.