1 Purpose
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Conventions - MARPOL - International Convention for the Prevention of Pollution from Ships - Unified Interpretations of Annex I - Appendix 4 - Specifications for the design, installation and operation of a part flow system for control of overboard discharges - 1 Purpose

1 Purpose

  1.1 The purpose of these specifications is to provide specific design criteria and installation and operational requirements for the part flow system referred to in regulation 30.6.5 of Annex I of the International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating thereto (MARPOL).

Parent topic: Appendix 4 - Specifications for the design, installation and operation of a part flow system for control of overboard discharges
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.