5.6 Cargo-transfer control systems
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - IBC Code - International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in BulkAmended by Resolution MEPC.225(64) - Chapter 5 Cargo transfer - 5.6 Cargo-transfer control systems

5.6 Cargo-transfer control systems

  5.6.1 For the purpose of adequately controlling the cargo, cargo-transfer systems shall be provided with:

  • .1 one stop-valve capable of being manually operated on each tank filling and discharge line, located near the tank penetration; if an individual deepwell pump is used to discharge the contents of a cargo tank, a stop-valve is not required on the discharge line of that tank;

  • .2 one stop valve at each cargo-hose connection;

  • .3 remote shutdown devices for all cargo pumps and similar equipment.

  5.6.2 The controls necessary during transfer or transport of cargoes covered by the Code other than in cargo pump-rooms which have been dealt with elsewhere in the Code shall not be located below the weather deck.

  5.6.3 For certain products, additional cargo-transfer control requirements are shown in column o in the table of Summary of minimum requirements.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.