Reg. 19.3.3
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Conventions - MARPOL - International Convention for the Prevention of Pollution from Ships - Unified Interpretations of Annex I - 39 Width of wing tanks and height of double bottom tanks at turn of the bilge area - Reg. 19.3.3

Reg. 19.3.3

 The requirements of regulation 19.3.3 at turn of the bilge areas are applicable throughout the entire tank length.

Parent topic: 39 Width of wing tanks and height of double bottom tanks at turn of the bilge area
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.