Circular
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1537/Rev.1 - Unified Interpretations of the 2008 IS Code – (4 July 2019) - Circular

Circular

1 The Maritime Safety Committee, at its ninety-sixth session (11 to 20 May 2016), in order to facilitate global and consistent implementation of requirements of the 2008 Intact Stability Code (2008 IS Code), approved unified interpretations of the 2008 IS Code (MSC.1/Circ.1537), prepared by the Sub-Committee on Ship Design and Construction, at its third session.

2 The Maritime Safety Committee, at its 101st session (5 to 14 June 2019), approved amendments to MSC.1/Circ.1537 to include revisions to the unified interpretations of section 2.3 (Severe wind and rolling criterion (weather criterion)), as well as to section 3.4.2 (Assumptions for calculating loading conditions), prepared by the Sub-Committee on Ship Design and Construction, at its sixth session. The amended text of the Unified Interpretations is set out in the annex.

3 Member States are invited to apply the annexed unified interpretations and to bring them to the attention of all parties concerned.

4 This circular supersedes MSC.1/Circ.1537.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.