Footnote
Clasification Society 2024 - Version 9.40

Footnote

Parent topic: Footnotes

ISO 12215-5 (see Appendix 13 of this code) should be used with caution where the vessels’ hull or superstructure is fabricated of fibre reinforced plastic, or where the vessel is subject to impact loading from contact with fixed structures such as offshore wind farm turbine towers, or the vessel is a multihull, until such time that it is updated with respect to commercial vessels. Where this standard is applied to fibre reinforced plastic (FRP) vessels, Annex C FRP Laminate Properties and Calculations should also be referred to. This Annex is intended to support the ISO standard and is part of the scantling requirements of that standard.
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.