Clasification Society Rulefinder 2022 - Version 9.36
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.437(99) - Amendments to the International Code For Application Of Fire Test Procedures, 2010 (2010 FTP Code) - (adopted on 24 May 2018) - Annex - Amendments to the International Code for Application of Fire Test Procedures, 2010 (2010 FTP Code)

Annex - Amendments to the International Code for Application of Fire Test Procedures, 2010 (2010 FTP Code)

 This document has been consolidated into Annex 3 of 2010 FTP Code

Annex 3 - Fire Protection Materials and Required Approval Test Methods

1 The existing title of table 1 is amended to read as follows:

  • "Table 1 Fire protection materials and required approval test methods for passenger ships and high-speed craft".

2 In table 1, the existing column "Applicable regulation" is amended as follows:

  • .1 in rows ""A" class bulkhead", ""B" class bulkhead", ""C" class bulkhead", ""A" class deck", ""B" class deck", ""B" class lining" and ""B" class ceilings", the reference to "9.2.2.4" is added;

  • .2 in row ""B" class continuous ceilings", the reference to "9.2.2.4.3" is added;

  • .3 in row "Partial bulkheads", the reference to "5.3.1.2.1" is replaced with the reference to "5.3.1.3.1"; and

  • .4 in row "Fire Door Control System", the reference to "9.4.1.1.4.15" is replaced with the reference to "9.4.1.1.5.15".


Copyright 2021 Clasification Society Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.