1.2 Product consistency
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1384 – Guidelines for the Testing and Approval of Fixed High-Expansion Foam Systems – (10 December 2010) - Annex – Guidelines for the Testing and Approval of Fized High-Expansion Foam Systems - 1 General - 1.2 Product consistency

1.2 Product consistency

 The manufacturer should be responsible for implementing a quality control programme to ensure that production continuously meets the requirements in the same manner as the originally tested samples.

Parent topic: 1 General
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.