Cross-references
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Ships, July 2022 - Main and Auxiliary Machinery - Other Pressure Vessels - Cross-references

Cross-references

For shape factors for dished ends, see Pt 5, Ch 10, 4.2 Shape factors for dished ends.

For dished ends with unreinforced openings, see Pt 5, Ch 10, 4.3 Dished ends with unreinforced openings.

For flanged openings in dished ends, see Pt 5, Ch 10, 4.4 Flanged openings in dished ends.

For location of unreinforced and flanged openings in dished ends, see Pt 5, Ch 10, 4.5 Location of unreinforced and flanged openings in dished ends.

For dished ends with reinforced openings, see Pt 5, Ch 10, 4.6 Dished ends with reinforced openings and Pt 5, Ch 10, 4.7 Torispherical dished ends with reinforced openings.

Parent topic: Chapter 11 Other Pressure Vessels
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.