Supplement to Engine International Air Pollution Prevention Certificate (EIAPP Certificate)
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code (2008) - Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines - Appendix 1 – Form of EIAPP Certificate(Refer to 2.2.10 of the NOx Technical Code 2008) - Supplement to Engine International Air Pollution Prevention Certificate (EIAPP Certificate)

Supplement to Engine International Air Pollution Prevention Certificate (EIAPP Certificate)

RECORD OF CONSTRUCTION, TECHNICAL FILE AND MEANS OF VERIFICATION

Notes
1 This Record and its attachments shall be permanently attached to the EIAPP Certificate. The EIAPP Certificate shall accompany the engine throughout its life and shall be available on board the ship at all times.
2 The Record shall be at least in English, French or Spanish. If an official language of the issuing country is also used, this shall prevail in case of a dispute or discrepancy.
3 Unless otherwise stated, regulations mentioned in this Record refer to regulations of Annex VI of the Convention and the requirements for an engine’s technical file and means of verifications refer to mandatory requirements from the Revised NOx Technical Code 2008.
1 Particulars of the engine
1.1 Name and address of manufacturer ..................................................................
1.2 Place of engine build ...........................................................................................
1.3 Date of engine build ............................................................................................
1.4 Place of pre-certification survey .........................................................................
1.5 Date of pre-certification survey ...........................................................................
1.6 Engine type and model number ..........................................................................
1.7 Engine serial number ..........................................................................................
1.8 If applicable, the engine is a parent engine or a member engine of the following engine family or engine group ...................................................................................
1.9 Individual engine or engine family/engine group details:
1.9.1 Approval reference .......................................................................................................
1.9.2 Rated power (kW) and rated speed (rpm) values or ranges .........................................................
1.9.3 Test cycle(s) ............................................................................................................
1.9.4 Parent engine(s) test fuel oil specification ........................................................
1.9.5 Applicable NOx emission limit (g/kW h) , regulation 13.3, 13.4, or 13.5.1 (delete as appropriate) ..............................................................
1.9.6 Parent engine(s) emission value (g/kWh) .........................................................
2 Particulars of the technical file

The technical file, as required by chapter 2 of the NOx Technical Code 2008, is an essential part of the EIAPP Certificate and must always accompany an engine throughout its life and always be available on board a ship.

2.1 Technical file identification/approval number ......................................................
2.2 Technical file approval date ................................................................................
3 Specifications for the onboard NOx verification procedures
The specifications for the onboard NOx verification procedures, as required by chapter 6 of the NOx Technical Code 2008, are an essential part of the EIAPP Certificate and must always accompany an engine through its life and always be available on board a ship.
3.1 Engine parameter check method:
3.1.1 Identification/approval number .........................................................................
3.1.2 Approval date ...................................................................................................
3.2 Direct measurement and monitoring method:
3.2.1 Identification/approval number .........................................................................
3.2.2 Approval date ...................................................................................................
Alternatively the simplified measurement method in accordance with 6.3 of the NOx Technical Code 2008 may be utilized.
Issued at ...................................................................................................................................................................................
(Place of issue of certificate)
(dd/mm/yyyy)....................... ................................................................
(Date of issue) (signature of duly authorized official issuing the certificate)
   
(Seal or stamp of the authority, as appropriate)
Parent topic: Appendix 1 – Form of EIAPP Certificate (Refer to 2.2.10 of the NOx Technical Code 2008)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.