Statutory Documents - MCA Publications - LY3 - The Large Commercial Yacht Code - 10A Bilge Pumping - Vessels of less than 500GT - 10A.2
10A.2
All vessels should be provided with at least two fixed and independently powered bilge pumps, with suction pipes so arranged that any compartment can be effectively drained when the vessel is heeled to an angle of 10º. For Short Range Yachts, the second pump and suction pipes may be portable.
| Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |