5.2.1 Test condition parameter and test validity for engine family approval
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code - Technical Code on Control of Emission of Nitrous Oxides from Marine Diesel Engines - Chapter 5 - Procedures for NOx emission measurements on a test bed - 5.2 Test conditions - 5.2.1 Test condition parameter and test validity for engine family approval

5.2.1 Test condition parameter and test validity for engine family approval

 Parameter f a shall be determined according to the following provisions:

  • .1 naturally aspirated and mechanically supercharged engines:

    (1)
  • .2 turbocharged engine with or without cooling of the intake air:

    (2)

and, for a test to be recognized as valid, parameter f ashall be such that:

(3)

If, for evident technical reasons, it is not possible to comply with this requirement, f a shall be between 0.93 and 1.07.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.