Section 38 Wave contour development
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part 12 Recognised Codes and Standards for the Classification of Offshore Units - Chapter 1 Recognised Codes and Standards - Section 38 Wave contour development

Section 38 Wave contour development

Parent topic: Chapter 1 Recognised Codes and Standards

38.1 Recognised codes and standards for wave contour development

38.1.1 The following codes and standards are recognised by LR:

  • Environmental Parameters for Extreme Response: Inverse FORM with Omission Factors, Winterstein et al, ISBN No. 9054103571
  • ISO 19901-1 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 1: Metocean design and operating considerations
  • SNAME Transactions 2009, Environmental Contour Lines: A Method for Estimating Long Term Extremes by a Short Term Analysis, Haver S. & Winterstein S.R
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.