In addition to properties and information specified in annex
1, the following properties and information should be reported:
-
.1 for the following provide appropriate hazards
identification in section 2, composition/information on ingredients
in section 3, and toxicological information in section 11 of the MSDS:
-
.1 Benzene – if present ≥ 0.1% by weight
(even if naturally occurring ingredient of the material);
-
.2 Hydrogen sulphide – if present at any
concentration, in liquid and vapour phases, or if possible to accumulate
in a tank's vapour space; and
-
.3 Total Sulphur – if present ≥0.5% by
weight, identify in section 3 and warn of potential for hydrogen sulphide
evolution in sections 2 and 11;
-
.2 for physical and chemical properties in section
9 of the MSDS:
-
.1 appearance (physical state, colour, etc.);
-
.2 odour;
-
.3 pour point;
-
.4 boiling range;
-
.5 flashpoint;
-
.6 upper/lower flammability or explosive limits;
-
.7 vapour pressure (Reid vapour pressure (RVP)
when appropriate);
-
.8 vapour density;
-
.9 density;
-
.10 auto-ignition temperature; and
-
.11 kinematic viscosity; and
-
.3 for ecological information in section 12 of
the MSDS: Persistent or non-persistent oil as per the International
Oil Pollution Compensation (IOPC) Fund definitionfootnote