6.1.7.1 Every fast rescue boat launching appliance
shall comply with the requirements of paragraphs 6.1.1 and 6.1.2 except
6.1.2.10 and, in addition, shall comply with the requirements of this
paragraph.
6.1.7.2 The launching appliance shall be fitted
with a device to dampen the forces due to interaction with the waves
when the fast rescue boat is launched or recovered. The device shall
include a flexible element to soften shock forces and a damping element
to minimize oscillations.
6.1.7.3 The winch shall be fitted with an automatic
high-speed tensioning device which prevents the wire from going slack
in all sea state conditions in which the fast rescue boat is intended
to operate.
6.1.7.4 The winch brake shall have a gradual action.
When the fast rescue boat is lowered at full speed and the brake is
applied sharply, the additional dynamic force induced in the wire
due to retardation shall not exceed 0.5 times the working load of
the launching appliance.
6.1.7.5 The lowering speed for a fast rescue boat
with its full complement of persons and equipment shall not exceed
1 m/s. Notwithstanding the requirements of paragraph 6.1.1.9, a fast
rescue boat launching appliance shall be capable of hoisting the fast
rescue boat with 6 persons and its full complement of equipment at
a speed of not less than 0.8 m/s. The appliance shall also be capable
of lifting the rescue boat with the maximum number of persons that
can be accommodated in it, as calculated in accordance with paragraph
4.4.2.