2 Sampling
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1387 – Revised Guidelines for the Approval of Fixed Water-Based Local Application Fire-Fighting Systems for Use in Category A Machinery Spaces (MSC/Circ.913) – (10 December 2010) - Annex – Revised Guidelines for the Approval of Fixed Water-Based Local Application Fire-Fighting Systems for Use in Category A Machinery Spaces - Appendix – Test Method for Fixed Water-Based Local Application Fire-Fighting Systems - 2 Sampling

2 Sampling

  2.1 The nozzles and other system components should be supplied by the manufacturer with design and installation criteria, operating instructions, drawings, and technical data sufficient for the identification of the components.

  2.2 The flow rate for each type and size of nozzle should be determined at the minimum nozzle operating pressure.

Parent topic: Appendix – Test Method for Fixed Water-Based Local Application Fire-Fighting Systems
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.