Section 6 Installation of windows
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Construction & Classification of Submersibles & Diving Systems, July 2022 - Part 3 Pressure Chambers - Chapter 2 Acrylic Windows - Section 6 Installation of windows

Section 6 Installation of windows

Parent topic: Chapter 2 Acrylic Windows

6.1 Cavity seat preparation

6.1.1 Before installation of a Window the cavity seat in the flange must be thoroughly cleaned with suitable cleaning materials. After installation a check should be made to establish that the bolting of the viewport has been evenly tightened.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.