Section 2 Design Details
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Construction & Classification of Submersibles & Diving Systems, July 2022 - Part 5 Main and Auxiliary Machinery, Systems and Equipment - Chapter 5 Diving Umbilicals - Section 2 Design Details

Section 2 Design Details

2.1 Data

2.1.1 The following design data is to be submitted for consideration:
  1. Maximum design depth of the diving system.
  2. Minimum diameter of stowage coil or reel.
  3. Helix angle of hoses and electric cables.
  4. Weight of submersible in air and water and strength of lifting line if incorporated.
  5. Cross-sectional drawing of umbilical showing the arrangement and dimensions of hoses, electric cables and strength member.
  6. Type of covering for the umbilical and any packing materials.
  7. End sealing arrangements of umbilicals, hoses and electric cables.
  8. Name, type and model numbers of hoses, electric cables and connectors.
  9. Voltage and current ratings for all circuits.
  10. Details of materials used for the conductors, insulation, fillers and sheaths of electric cables.
  11. Anticipated minimum and maximum surface air temperatures.
  12. Minimum recommended static bend radius.
  13. Weight of 1 metre length of composite umbilical.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.