Statutory Documents - MCA Publications - LY3 - The Large Commercial Yacht Code - 5 Weathertight Integrity - 5.8 Scuppers, Sea Inlets and Discharges and Other Hull Penetrations
5.8 Scuppers, Sea Inlets and Discharges and Other Hull Penetrations
5.8.1 The standards of ICLL should be applied to every discharge led through the shell of the vessel as far as it is reasonable and practicable to do so, and in any case, all sea inlet and overboard discharges should be provided with efficient shut-off valves arranged in positions where they are readily accessible at all times.
5.8.2 Underwater lights and associated penetrations fitted in the hull should be approved by the Classification Society.
| Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |