3 Confirmatory tests
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Marine Environment Protection Committee - MEPC.1/Circular.677 – Guide to Diagnosing Contaminants in Oily Bilge Water to Maintain, Operate and Troubleshoot Bilge Water Treatment Systems – (22 July 2009) - Annex – A Guide to Diagnosing Contaminants in Oily Bilge Water to Maintain, Operate and Troubleshoot Bilge Water Treatment Systems - Annex 5 – Post–treatment (OWS) Oil Sheen - 3 Confirmatory tests

3 Confirmatory tests

 Visual examination should be followed with immersion of the top layer of a sample and testing with an oil-affinity material (e.g., sorbent).

  • Sampling Instructions

    • • Take a small container and draw bilge water at OWS outlet. (To diagnose OWS capability to handle contaminated bilge water.)

Parent topic: Annex 5 – Post–treatment (OWS) Oil Sheen
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.