3.3 Display system
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Safety of Navigation - Circular SN/Circ.227- Guidelines for the Installation of a Shipborne Automatic Identification System (AIS) – (6 January 2003)Amended by SN/Circ.245 - Annex - Guidelines for the Installation of a Shipborne Automatic Identification System (AIS) - 3 Bridge Arrangement - 3.3 Display system

3.3 Display system

 If there is navigational equipment capable of processing and displaying AIS information such as ECDIS, radar or an integrated system available on board the ship, the AIS Class A mobile system may be connected to that system via the AIS Presentation Interface (PI). The PI (input/output) should meet the requirements of IEC 61162-2.

The display system can also include the functionality of an MKD, see 3.1.

Parent topic: 3 Bridge Arrangement
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.