4 Assumed volumetric heeling moments in trunks
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - Grain Code - International Code for the Safe Carriage of Grain in Bulk – Resolution MSC.23(59) - Part B - Calculation of assumed heeling moments and general assumptions - 4 Assumed volumetric heeling moments in trunks

4 Assumed volumetric heeling moments in trunks

 After the assumed shift of grain the final void pattern shall be as shown in figure B 4:

Figure B4

 If the wing spaces in way of the trunk cannot be properly trimmed in accordance with A 10, it shall be assumed that a 25° surface shift takes place.

Parent topic: Part B - Calculation of assumed heeling moments and general assumptions
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.