9 Inspection and maintenance
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - Noise Levels - Code on Noise Levels on Board Ships – Resolution A.468(XII) - Appendix 3 - Suggested Methods Of Controlling Noise Exposure - 9 Inspection and maintenance

9 Inspection and maintenance

 All items of machinery, equipment and associated working spaces should be periodically inspected as part of the onboard safety management system with respect to any noise control/reduction features. Should such inspection reveal defects in the means for noise control, or other defects causing excessive noise, these should be rectified as soon as is practical.

Parent topic: Appendix 3 - Suggested Methods Of Controlling Noise Exposure
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.