7 The High-Expansion Foam Generator
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1384 – Guidelines for the Testing and Approval of Fixed High-Expansion Foam Systems – (10 December 2010) - Annex – Guidelines for the Testing and Approval of Fized High-Expansion Foam Systems - Appendix 4 – Optional Small Scale Test Method for High–Expansion Foam Concentrates to be Used With Inside Air - 7 The High-Expansion Foam Generator

7 The High-Expansion Foam Generator

 High-expansion foam generator should have a flow rate of approximately 3 ⋉/min at a pressure of 6 bar.

Parent topic: Appendix 4 – Optional Small Scale Test Method for High–Expansion Foam Concentrates to be Used With Inside Air
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.