4.1 The open reversible liferafts should be packed
in a container that is:
-
.1 so constructed as to withstand conditions encountered
at sea;
-
.2 of sufficient inherent buoyancy, when packed
with the liferaft and its equipment, to pull the painter from within
and to operate the inflation mechanism should the craft sink; and
-
.3 as far as practicable, watertight, except for
drain holes in the container bottom.
4.2 The container should be marked with:
-
.1 maker’s name or trademark;
-
.2 serial number;
-
.3 the number of persons it is permitted to carry;
-
.4 non-SOLAS reversible;
-
.5 type of emergency pack enclosed;
-
.6 date when last serviced;
-
.7 length of painter;
-
.8 maximum permitted height of stowage above waterline
(depending on drop-test height); and
-
.9 launching instructions.