|
|
2 Within the cargo length area: two
transverse sections of deck plating outside line of cargo hatch openings
3
Measurements, for general assessment and recording of corrosion pattern, of
those structural members subject to close-up survey according to annex
1
4 Wind and water strakes in way of transverse sections considered under
point 2 above
5 Selected wind and water strakes outside the cargo
length area
6 See 1.1.5 and annex 15 for additional thickness measurement
guidelines applicable to the side shell frames and brackets on ships subject
to compliance with resolution MSC.168(79)
|
2 Within the cargo length
area:
- .1 each deck plate outside line of cargo hatch
openings
- .2 two transverse sections, one of which shall be in the
amidship area, outside line of cargo hatch openings
- .3 all wind and water strakes within the cargo length
area
3 Measurement, for general assessment and recording of
corrosion pattern, of those structural members subject to close-up survey
according to annex 1
4 Selected wind and water strakes outside the cargo length
area
5 See 1.1.5 and annex 15 for additional thickness measurement
guidelines applicable to the side shell frames and brackets on ships subject
to compliance with resolution MSC.168(79)
6 As required by annex
12 for ships subject to compliance with regulation
XII/6.1 of the Convention
|
2 Within the
cargo length area:
- .1 each deck plate outside line of cargo hatch
openings
- .2 three transverse sections, one of which shall be in the
amidship area, outside line of cargo hatch openings
- .3 each bottom plate
3 Point 3 referred to in Renewal Survey No.3
4 All wind and water strakes, full length
5
See 1.1.5 and annex 15 for additional thickness measurement
guidelines applicable to the side shell frames and brackets on ship subject
to compliance with resolution MSC.168(79)
6 As required by annex
12 for ships subject to compliance with regulation
XII/6.1 of the Convention
|