6.1.1
To ensure compliance
with this Standard, the following shall be carried out by qualified
coating inspectors certified to NACE Coating Inspector Level 2, FROSIO
Inspector Level III or equivalent as verified by the Administration.
6.1.2
Coating inspectors shall
inspect surface preparation and coating application during the coating
process by carrying out, as a minimum, those inspection items identified
in section 6.2 to ensure compliance with this Standard. Emphasis shall
be placed on initiation of each stage of surface preparation and coatings
application as improper work is extremely difficult to correct later
in the coating progress. Representative structural members shall be
non-destructively examined for coating thickness. The inspector shall
verify that appropriate collective measures have been carried out.
6.1.3
Results from the inspection
shall be recorded by the inspector and shall be included in the CTF
(refer to annex 2 (Example of daily log and non-conformity report))."