1 Suspect areas
|
1 Suspect areas
2 Within
the cargo length area: two transverse sections of deck plating outside
line of cargo hatch openings
3 Measurement, for general
assessment and recording of corrosion pattern, of those structural
members subject to close-up survey according to appendices 1 or 2 to
annex 1 as applicable
4 Wind and water strakes in way
of the two transverse sections considered under point 2 above
5 Selected wind and water strakes outside the cargo length
area
|
1 Suspect areas
2
Within the cargo length area:
- .1 each deck plate outside line of cargo hatch
openings
- .2 two transverse sections, one of which shall be in
the amidship area, outside line of cargo hatch openings
- .3 All wind and water strakes within the cargo length area
3 Measurement, for general assessment and
recording of corrosion pattern, of those structural members subject to
close-up survey according to appendices 1 or 2 to annex 1 as
applicable
4 Selected wind and water strakes outside
the cargo length area
|
1 Suspect areas
2 Within
the cargo length area:
- .1 each deck plate outside line of cargo hatch
openings
- .2 three transverse sections, one of which should be
in the amidship area, outside line of cargo hatch openings
- .3 each bottom plate
3 Point 3 referred to in Renewal Survey
No.3
4 All wind and water strakes, full
length
|