4.5 Tolerances
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.800(19) – Revised Guidelines for Approval of Sprinkler Systems Equivalent to that Referred to in SOLAS Regulation II-2/12 – (Adopted on 23 November 1995) - Appendix 2 - Fire Test Procedures for Water Mist Systems in Accommodation, Public Spaces and Service Areas on Passenger Ships - 4 General Requirements - 4.5 Tolerances

4.5 Tolerances

 Unless otherwise stated, the following tolerances should apply:

.1 length ± 2% of value
.2 volume ± 5% of value
.3 pressure ± 3% of value; and
.4 temperature ± 5% of value

 These tolerances are in accordance with ISO Standard 6182-1:1994.

Parent topic: 4 General Requirements
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.