5.6 Test report
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1195 – Guidelines for the Conduct of High-speed Craft Model Tests – (2 June 2006) - Annex - Guidelines for Model Testing - 5 Test Procedure - 5.6 Test report

5.6 Test report

 The test report should include the following information as a minimum:

  • .1 general arrangement drawing of the craft, showing the spaces that might be flooded as a result of failure of the bow loading door;

  • .2 general arrangement drawing of the model, showing the scale ratio and details of the construction and instrumentation;

  • .3 calculations to show the derivation of the maximum operational and minimum operational weights and corresponding limiting KG positions;

  • .4 tests conducted to verify the mass, centre-of-gravity position and radii of gyration;

  • .5 where appropriate, calculations to show that the elements necessary to achieve the non-displacement mode have been appropriately scaled;

  • .6 the nominal and measured wave spectra (at the fixed wave probe location); and

  • .7 records for each test case:

    • .7.1 wave elevation at model position;

    • .7.2 relative wave height at the opening; and

    • .7.3 internal water volume measurements.

Parent topic: 5 Test Procedure
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.