APPENDIX
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.279(70) – 2016 Guidelines for Approval of Ballast Water Management Systems (G8) – (Adopted on 28 October 2016) - ANNEX - APPENDIX

APPENDIX

 
BADGE OR CIPHER (Limiting Operating Conditions Apply)
    (delete as appropriate)
         
NAME OF ADMINISTRATION
         
TYPE APPROVAL CERTIFICATE OF BALLAST WATER MANAGEMENT SYSTEM
This is to certify that the ballast water management system listed below has been examined and tested in accordance with the requirements of the specifications contained in the Guidelines contained in IMO resolution MEPC.279(70). This certificate is valid only for the Ballast Water Management System referred to below.
Name of Ballast Water Management System: .......................................................................
Ballast Water Management System manufactured by: ..........................................................
Under type and model designation(s) and incorporating: .....................................................
To equipment/assembly drawing No.: ......................................... date: .........................
Other equipment manufactured by : ......................................................................................
To equipment/assembly drawing No.: ........................................... date: .........................
Treatment Rated Capacity (m3/h): .........................................................................................
A copy of this Type Approval Certificate, should be carried on board a ship fitted with this Ballast Water Management System. A reference to the test protocol and a copy of the test results should be available for inspection on board the ship. If the Type Approval Certificate is issued based on approval by another Administration, reference to that Type Approval Certificate shall be made.
Limiting Operating Conditions imposed are described in this document.
(Temperature / Salinity)
Other restrictions imposed include the following:
This equipment has been designed for operation in the following conditions:
(insert System Design Limitations)
 
Official stamp   Signed ................................................................................
    Administration of .................................................................
    Issued this ................. day of ......................... 20 ......
    Valid until this………… day of ………………... 20…..
Enc. Copy of the original test results.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.