For the purpose of this guidance:
2.1
Shipboard fittings mean bollards
and bitts, fairleads, stand rollers and chocks used for the normal
mooring of the ship and similar components used for the normal towing
of the ship. Other components such as capstans, winches, etc. are
not covered by this guidance. Any weld, bolt or other fastening connecting
the shipboard fitting to the supporting hull structure is part of
the shipboard fitting and subject to any industry standard applicable
to such fitting.
2.2
Supporting hull structure means
that part of the ship structure on/in which the shipboard fitting
is placed and which is directly submitted to the forces exerted on
the shipboard fitting. The hull structure supporting capstans, winches,
etc. used for the normal towing and mooring operations mentioned above
should also be subject to this guidance.
2.3
Industry standard means international
or national standards which are recognized in the country where the
ship is built, subject to the approval of the Administration.