5.2.1.5.2 Replace paragraph with “In the
case of excepted packages marking the proper shipping name is not
required.”
5.2.1.6 Replace section with:
“5.2.1.6.1 Packages containing marine pollutants
meeting the criteria of 2.10.3 shall be durably marked with the marine
pollutant mark with the exception of single packagings and combination
packagings containing inner packagings with:
5.2.1.6.2 The marine pollutant mark shall be located
adjacent to the markings required by 5.2.1.1. The provisions of 5.2.1.2
and 5.2.1.4 shall be met.
5.2.1.6.3 The marine pollutant mark shall be as
shown below. For packagings, the dimensions shall be at least 100
mm × 100 mm, except in the case of packages of such dimensions
that they can only bear smaller marks.
mscres.262.84_figMpm
5.2.1.7 Delete “open” before “cryogenic
receptacles intended for the transport of”
5.2.1.7.1(a) Insert “except for cryogenic
receptacles” after “pressure receptacles”
5.2.1.8 Insert new section:
“5.2.1.8
Excepted quantity mark
5.2.1.8.1 Packages containing excepted quantities
of dangerous goods shall be marked according to 3.5.4.”
5.2.2.1.12.1 Replace “Except as provided
for large freight containers and tanks in accordance with 5.3.1.1.5.1”
with “Except when enlarged labels are used in accordance with
5.3.1.1.5.1”
5.2.2.1.12.2.4 Replace “See 2.7.6.1.1 and
2.7.6.1.2” with “The number determined in accordance with
5.1.5.3.1 and 5.1.5.3.2”
5.2.2.2.1.1 Replace “They shall have a line
of the same colour as the symbol, 5 mm inside the edge and running
parallel with it.” with “They shall have a line 5 mm inside
the edge and running parallel with it. In the upper half of a label
the line shall have the same colour as the symbol and in the lower
half it shall have the same colour as the figure in the bottom corner.”
5.2.2.2.1.2 Replace “ISO 7225:1994”
with “ISO 7225:2005” (twice)
5.2.2.2.1.3 Replace with “With the exception
of divisions 1.4, 1.5 and 1.6 of class 1, the upper half of the label
shall contain the pictorial symbol and the lower half shall contain
the class number 1, 2, 3, 4, 4.1, 5.2, 6, 7, 8 or 9 as appropriate.
The label may include text such as the UN number, or words describing
the hazard class (e.g., “flammable”) in accordance with
5.2.2.2.1.5 provided the text does not obscure or detract from the
other label elements.”
5.2.2.2.1.4 Replace “Except for divisions
1.4, 1.5 and 1.6, labels for class 1 show in the lower half”
with “In addition, except for divisions 1.4, 1.5 and 1.6, labels
for class 1 shall show in the lower half, above the class number,”
Replace “Labels for divisions 1.4, 1.5 and 1.6 show
in the upper half the division number and in the lower half the”
with “Labels for divisions 1.4, 1.5 and 1.6 shall show in the
upper half the division number and in the lower half the class number
and the”
5.2.2.2.1.6.3 Renumber as “5.2.2.2.1.6.4”
Insert “the class 5.2 label, where the symbol may
be shown in white; and”
Consequential amendments:
5.2.2.2.2 Replace “5.2.2.2.1.6.3”
with “5.2.2.2.1.6.4” for class 2.1
5.2.2.2.1.6.2 Delete “and” after “…
where they may be shown in white;”