|
|
|
|
|
| 1
|
2
|
3
|
4
|
| 1.Suspect
areas
|
1.Suspect
areas
|
1.Suspect
areas
|
1.Suspect
areas
|
|
|
2. Within the
cargo length area:
|
2. Within the
cargo length area:
|
2. Within the
cargo length area:
|
|
|
.1 Two
transverse sections of deck plating outside line of cargo hatch
openings
|
.1 Each deck
plate outside line of cargo hatch openings
|
.1 Each deck
plate outside line of cargo hatch openings
|
|
|
3. Measurement
for general assessment and recording of corrosion pattern, of those structural
members subject to close-up survey according to annex 1.
|
.2 Two
transverse sections, one of which should be in the amidship area, outside line
of cargo hatch openings
|
.2 Three
transverse sections, one of which should be in the amidship area, outside line
of cargo hatch openings
|
|
|
4. Selected
cargo hold hatch covers and coamings (plating and stiffeners).
|
3.
Measurement, for general assessment and recording of corrosion pattern, of
those structural members subject to close-up survey according to annex
1.
|
.3 Each Bottom
Plate
|
|
|
5. Selected
areas of deck plating inside lime of openings between cargo hold
hatches.
|
4. All cargo
hold hatch covers and coamings (plating and stiffeners).
|
3. Points 3 to
7 referred to in column 3
|
|
|
6. Wind and
water strakes in way of transverse sections considered under point 2
above.
|
5. All deck
plating inside line of openings between cargo hold hatches.
|
|
|
|
|
6. All wind and
water strakes within the cargo length area.
|
|
|
|
|
7. Selected
wind and water strakes outside the cargo length area.
|
|
|
|
|
8. As required by annex
12 for ships subject to compliance with regulation XII/6.2 of the
Convention.
|
|