1 Introduction
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - Intact Stability (IS) Code - Intact Stability for All Types of Ships Covered by IMO Instruments – Resolution A.749(18) - Annex - Code on Intact Stability for all Types of Ships Covered by IMO Instruments - Annex 1 - Detailed Guidance for the Conduct of an Inclining Test - 1 Introduction

1 Introduction

 This annex supplements the inclining standards put forth in chapter 7 of this Code. This annex contains important detailed procedures for conducting an inclining test in order to ensure that valid results are obtained with maximum precision at a minimal cost to owners, shipyards and the Administration. A complete understanding of the correct procedures used to perform an inclining test is imperative in order to ensure that the test is conducted properly and so that results can be examined for accuracy as the inclining experiment is conducted.

Parent topic: Annex 1 - Detailed Guidance for the Conduct of an Inclining Test
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.