Section 25 Mooring and towing fittings
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part 12 Recognised Codes and Standards for the Classification of Offshore Units - Chapter 1 Recognised Codes and Standards - Section 25 Mooring and towing fittings

Section 25 Mooring and towing fittings

Parent topic: Chapter 1 Recognised Codes and Standards

25.1 Recognised codes and standards for mooring and towing fittings

25.1.1 The following codes and standards are recognised by LR:
  • BS EN 10204 Metallic products – Types of inspection documents
  • ISO 13728 Ships and marine technology – Ship's mooring and towing fittings – Panama chocks
  • ISO 13733 Ships and marine technology – Ship’s mooring and towing fittings – Universal fairleads with upper roller
  • ISO 13795 Ships and marine technology – Ship's mooring and towing fittings – Welded steel bollards for sea-going vessels
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.