Section 1 Vibration - international standards
Clasification Society 2024 - Version 9.40
Clasifications Register Guidance Information - Ship Vibration and Noise Guidance Notes - Chapter 11 Related Standards, references and bibliography - Section 1 Vibration - international standards

Section 1 Vibration - international standards

IEC 92-504 Electrical installations in ships. Special features: control and instrumentation.
ISO 2041:1990 Glossary of terms relating to mechanical vibration and shock
ISO.2372 Mechanical vibration of machines with operating speeds from 10 to 100 rev/s - Basis for specifying evaluation standards.
ISO.2373 Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm - Measurement and evaluation of the vibration severity.
ISO.2631-1:1997 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration – Part 1: General requirements. Similar, but not identical to, BS.6841.
ISO.2631-2:1989 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration – Part 2: Continuous and shock induced-induced vibrations in buildings (1 to 80 Hz).
ISO.3945 Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s - Measurement and evaluation of vibration severity in situ.
ISO.4548-7:1990 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test.
ISO.4866:1990 Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings.
ISO.4867:1984 Code for the measurement of and reporting of shipboard vibration data.
ISO.4868:1984 Code for the measurement of local vibration data of ships structures and equipment.
ISO.6954:1984 Mechanical vibration and shock - guidelines for the overall evaluation of vibration in merchant ships.
ISO 6954:2000 Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
ISO.7919-1:1996 Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 1: General guidelines.
ISO.7919-2:2001 Part 2: Land-based steam turbines and generator in excess of 50 MW with normal operating speeds of 1500rpm, 1800 rpm, 3000 rpm, and 3600 rpm.
ISO.7919-3:1996 Part 3: Coupled industrial machines.
ISO.7919-4:1996 Part 4: Gas turbine sets.
ISO.7919-5:1996 Part 5: Machine sets in hydraulic power generating and pumping plants.
ISO.8528-9:1995 Reciprocating internal combustion engine driven alternating current generating sets- Part 9: Measurement and evaluation of mechanical vibrations.
ISO.8579-2 Acceptance code for gears - Part 2: Determination of mechanical vibrations of gears during acceptance testing.
ISO.10816-1:1995 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines.
ISO.10816-2:2001 Part 2: Land-based steam turbines and generator sets in excess of 50 MW with normal operating speeds of 1500rpm, 1800 rpm, 3000 rpm, and 3600 rpm.
ISO.10816-3:1998 Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 rpm and 15000 rpm when measured in situ.
ISO.10816-4:1998 Part 4: Gas turbine sets excluding aircraft derivatives.
ISO.10816-5:2000 Part 5: Machine sets in hydraulic power generating and pumping plants.
ISO.10816-6:1995 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 6: Reciprocating machines with power ratings above 100 kW.
Parent topic: Chapter 11 Related Standards, references and bibliography
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.