Section 3 Noise - international standards
Clasification Society 2024 - Version 9.40
Clasifications Register Guidance Information - Ship Vibration and Noise Guidance Notes - Chapter 11 Related Standards, references and bibliography - Section 3 Noise - international standards

Section 3 Noise - international standards

IEC 179:1973 Noise level meters.
IEC 225:1966 Octave, half-octave and third-octave band filters intended for the analysis of sounds and vibrations.
IEC 268-16 : 1988 Sound level meters, and Amendment 1:1993.
IEC 651:1979 Sound Systems for Emergency Purposes
IEC 804:1985 Integrating-averaging sound level meters, and Amendments 1:1989 and 2:1993.IEC 942:1988
IEC 942:1988 Sound level calibrators.
IEC 1260:1995 Electroacoustics – Octave-band and fractional-octave-band filters.
IEC 60268-16:1988 Sound system equipment. Guide to the 'RASTI' method for the objective rating of speech intelligibility in auditoria
  Code on Alarms and Indicators 1992
IMO Resolution Code on noise levels on board ships.
A.468 (XII). 1982  
ISO 266:1997 Acoustics -- Preferred frequencies.
ISO 717-1:1996 Acoustics – rating of sound insulation in buildings and of building elements.
  Part 1: Airborne sound insulation.
ISO 717-2:1996 Acoustics – rating of sound insulation in buildings and of building elements.
  Part 2: Impact sound insulation.
ISO 1996:-1:1982 Acoustics -- Description and measurement of environmental noise -- Part 1: Basic quantities and procedures
ISO 1996:-2:1987 Acoustics -- Description and measurement of environmental noise -- Part 2: Acquisition of data pertinent to land use
ISO 1996:-3:1987 Acoustics -- Description and measurement of environmental noise -- Part 3: Application to noise limits
ISO 1999:1990 Acoustics -- Determination of occupational noise exposure and estimation of noise-induced hearing impairment
ISO 2204:1979 Acoustics – Guide to international standards on the measurement of airborne acoustical noise and evaluation of its effects on human beings.
ISO 2922:2000 Acoustics -- Measurement of airborne sound emitted by vessels on inland waterways and harbours
ISO 2923:1996 Acoustics -- Measurement of noise on board vessels
ISO 8528-10:1998 Reciprocating internal combustion engine driven alternating current generating sets-- Part 10: Measurement of airborne noise by the enveloping surface method.
ISO 9921-1:1996 Ergonomic assessment of speech communication. Part 1. Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method).
Parent topic: Chapter 11 Related Standards, references and bibliography
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.