Purpose
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.140(54) Guidelines for Approval and Oversight of Prototype Ballast Water Treatment Technology Programmes (G10) (Adopted on 24 March 2006) - Annex Guidelines for Approval and Oversight of Prototype Ballast Water Treatment Technology Programmes (G10) - 1 Introduction - Purpose

Purpose

  1.5 The main purpose of these Guidelines is to:

  • .1 assist Administrations to approve or reject proposed programmes and in cases where approval is granted, to issue a Statement of Compliance under regulation D-4;

  • .2 describe the responsibilities of the Administration in the oversight of the programme's execution; and

  • .3 encourage a uniform interpretation and application of regulation D-4.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.