Section 3 General installation requirements
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part 3 Functional Unit Types and Special Features - Chapter 14 Foundations - Section 3 General installation requirements

Section 3 General installation requirements

3.1 General installation requirements

3.1.1 Details of the proposed method of anchor and anchor line installation are to be submitted.

3.1.2 Except where stated, anchors are not required to be test loaded at installation. However, for catenary mooring systems preloading of the anchor line is to be performed to ensure its alignment through the seabed and to minimise in-service anchor line slack.

3.1.3 Visual surveys of the seabed are to be performed at the proposed anchor point locations immediately prior to installation. The visual survey should provide confirmation that the anchor point locations and immediate surrounding area are free of any other seabed obstacles or obstructions that may have appeared in the period since the geophysical survey was performed.

3.1.4 Design installation tolerances shall be included in the installation philosophy and where tolerances are not met further confirmation of anchor suitability should be provided. Anchor approval shall be based upon demonstration that the anchors remain suitable.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.