Paragraph 1.2.9.6 (Part 1 of the Annex) of resolution MEPC.107(49) should be interpreted
as follows:
It should be understood that the 15 ppm bilge separator
should operate continuously and automatically without any interruptions.
It should be assured that back flushing if performed during
the certification test does not cause:
-
Dilution of the test fluids A, B, or C, or
-
Dilution of the test sample sent to the laboratory for analysis.
If input flow of the test fluid is interrupted during
the performance of the test it should be assured that the total quantities
of the test fluids A, B, and C processed automatically are not less
than the nominal flow of the separator multiplied by the specified
test duration for each fluid.
While all the
time, the bilge separator operates continuously and automatically
without human intervention.