Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part
12 Recognised Codes and Standards for the Classification of Offshore Units - Chapter 1 Recognised Codes and Standards - Section
19 General structural items (skids, support frames and trusses etc.)
|
Section
19 General structural items (skids, support frames and trusses etc.)
19.1 Recognised codes and standards for general structural items (skids, support frames and trusses etc.)
19.1.1 The following codes and standards are recognised by LR:
- AISC LRFD Manual of Steel Construction – Load and Resistance
Factor Design
- AISC Manual of Steel Construction – Allowable Stress
Design
- API Bull 2V Design of Flat Plate Structures
- API RP 2A – WSD Planning, Design and Constructing Fixed
Offshore Platforms Working Stress Design
- API RP 2FPS Planning, Designing, and Constructing Floating
Production Systems
- API RP 2T Planning, Designing, and Constructing Tension Leg
Platforms
- API RP 2SK Design and Analysis of Stationkeeping Systems for
Floating Structures
- API Spec 4F Drilling and Well Servicing Structures
- BS 2853 Specification for the testing of steel overhead runway
beams for hoist blocks
- BS 5950-1 Structural use of steelwork in building. Code of
practice for design. Rolled and welded sections
- BS EN 1337-1 Structural. General design rules
- BS EN 1337-2 Structural bearings. Sliding elements
- BS EN 1337-3 Structural bearings. Elastomeric bearings
- BS EN 1337-5 Structural bearings. Pot bearing
- BS EN 1337-8 Structural bearings. Guide bearings and restrain
bearings
- BS EN 1337-9 Structural bearings. Protection
- BS EN 1337-10 Structural bearings. Inspection and maintenance
- BS EN 1337-11 Structural bearings. Transport, storage and
installation
- BS EN 1991 Eurocode 1: Actions on structures. General actions.
Wind actions
- BS EN 1993 Eurocode 3: Design of steel structures
- BS EN 1999 Eurocode 9: Design of aluminium structures. General
structural rules
- BS EN 10204 Metallic products – Types of inspection documents
- SNAME Technical & Research Bulletin 5-5A, Guidelines for Site Specific
Assessment of Mobile Jack-Up Units
- ISO 19905-1 Petroleum and natural gas industries – Site-specific assessment
of mobile offshore units – Part 1: Jack-ups
|
|
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime
and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective
officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications
Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance
on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant
Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is
exclusively on the terms and conditions set out in that contract.
|
![](LR-FooterLogo.png) |
|