Module 2B: Machinery systems
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.789(19) – Specifications on the Survey and Certification Functions of Recognized Organizations Acting on Behalf of the Administration – (Adopted on 23 November 1995) - Annex - Specifications on the Survey and Certification Functions of Recognized Organizations Acting on Behalf of the Administration - 2 Technical Appraisal - Module 2B: Machinery systems

Module 2B: Machinery systems

 The RO should have the appropriate competence, capability and capacity to perform technical evaluations and/or calculations pertaining to:

  • propulsion and auxiliary machinery and steering gear;
  • piping;
  • electrical and automation systems,

for compliance with relevant rules and convention requirements pertaining to design, construction and safety.

Parent topic: 2 Technical Appraisal
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.