Common Structural Rules - Common Structural Rules for Bulk Carriers and Oil Tankers, January 2019 - Part 1 General Hull Requirements - Chapter 7 Direct Strength Analysis - Section 3 Local Structural Strength Analysis - 1 Objective and Scope
1 Objective and Scope
1.1 General
1.1.1 The local strength analysis of structural details is to be in accordance with the requirements given in this section.
1.1.2 The selection of critical locations on the structural members for fine mesh analysis is to be in accordance with this section.
1.1.3 Fine mesh analysis procedure
The details to be assessed by fine mesh analysis are to be modelled according to the requirements given in [4], under the FE load combinations defined in [5] and to comply with the criteria given in [6].
1.1.4 Scope of local structural strength verification
| Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |