Common Structural Rules - Common Structural Rules for Bulk Carriers and Oil Tankers, January 2019 - Part 1 General Hull Requirements - Chapter 11 Superstructure, Deckhouses and Hull Outfitting - Section 1 Superstructures, Deckhouses and Companionways - 1 General
1 General
1.1 Application
1.1.1
The requirements of this section are applicable to superstructures, deckhouses and companionways, made of steel.
The requirements of Pt 1, Ch 6 apply in addition to those of this section for exposed decks of superstructure and the side of superstructure or deckhouse when this side is part of the side shell.
1.1.2
For the application of this section, a superstructure is considered being located aft or forward 0.4 L amidships or having a length of less than 0.15 L.
1.1.3
For the application of this section, the length of a deckhouse located within 0.4 L amidships is considered not exceeding 0.2 L.
1.2 Gross scantlings
1.2.1
With reference to Ch 3, Sec 2, [1.1.3], all scantlings and dimensions referred to in [3] are gross.
| Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |