1.1 The purpose of these guidelines is to provide
guidance on calculating the coefficient fw
from
the standard fw
curves, which is contained
in the EEDI.
1.2 These guidelines apply to ships for which
a simulation is not conducted to obtain the coefficient fw
following Guidelines for the simulation for the coefficient fw for
decrease in ship speed in a representative sea condition
.
1.3 The representative sea condition for each
ship is defined in paragraph 2.1 in the Guidelines for the simulation
for the coefficient fw for decrease in ship speed in a
representative sea condition
.
1.4 The design parameters in the calculation of fw
from the standard fw
curves
should be consistent with those used in the calculation of the other
components in the EEDI.