Section 3 Bearings
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part 12 Recognised Codes and Standards for the Classification of Offshore Units - Chapter 1 Recognised Codes and Standards - Section 3 Bearings

Section 3 Bearings

Parent topic: Chapter 1 Recognised Codes and Standards

3.1 Recognised codes and standards for bearings

3.1.1 The following codes and standards are recognised by LR:
  • ANSI/AFBMA Std 11 Load Ratings and Fatigue Life for Roller Bearings
  • ASME paper 77-DE-39 Design Criteria to Prevent Core Crushing Failure in Large Diameter Case Hardened Ball and Roller Bearings
  • BS ISO 281 Roller bearings. Dynamic load ratings and rating life
  • BS ISO 76 Roller bearings. Static load ratings
  • ISO 10438 (all parts) Petroleum and natural gas industries – Lubrication, shaft-sealing and control-oil systems and auxiliaries
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.