3.5 Derivation of the carbon balance for the incomplete combustion
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code - Technical Code on Control of Emission of Nitrous Oxides from Marine Diesel Engines - Appendix 6 - Calculation of exhaust gas mass flow (carbon-balance method) - 3 Method 2, universal, carbon / oxygen-balance - 3.5 Derivation of the carbon balance for the incomplete combustion

3.5 Derivation of the carbon balance for the incomplete combustion

  3.5.1 Carbon input in g/h:

(2-22)

  3.5.2 Carbon output in g/h:

(2-23)

  3.5.3 Based on the following definitions and formulae, the individual gas components are calculated in g/h related on wet exhaust gas (GC is the soot in g/h).

(2-24)
(2-25)
(2-26)
(2-27)

  3.5.4 For the balance condition:

Carbon input = Carbon output

 (2-28)

  3.5.5 Calculation of the exhaust mass flow on the basis of the carbon balance:

(2-29)
Parent topic: 3 Method 2, universal, carbon / oxygen-balance
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.